Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Connecticut

House Washing for Log Homes in Connecticut

Low-pressure wash for log homes. A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae. Typical cost $300-$700.

Looking for house washing for log homes in Connecticut? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. With log homes, the right approach is low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Low pressure with a wide tip; higher pressure only as part of stripping old finish before refinishingPressure

Cleaning solution: A log-safe wood cleaner or oxygen-based cleaner; strippers only when refinishing.

Caring for log homes

Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Avoid: High pressure that furs the wood and forces water deep into checks in the logs.

How often: Every 1-2 years, and before each refinish.

Signs you need house washing for log homes

  • Green or black film on the shaded sides of the house
  • Dirt splash along the bottom of the walls
  • Cobwebs and wasp nests under the eaves
  • Chalky or dull-looking siding
  • You're planning to paint, sell or list a rental

Where the grime comes from

  • Mildew and algae in shade and humidity
  • Rain splashing soil onto the bottom courses
  • Pollen, dust and road grime
  • Spiders and insects under the soffits

Easy upkeep between cleanings

  • Rinse small areas with a garden hose and a soft brush on an extension pole
  • Use a mild detergent made for siding, not household bleach straight from the bottle
  • Clear plants and furniture away from walls before a wash
  • Look for loose siding, open seams or damaged caulk before anyone washes the house

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Water driven under siding laps and into wall cavities
  • Broken window seals and water inside the house
  • Stripped paint, raised wood grain or etched stucco from high pressure
  • Ladder falls while spraying

What happens on the day

  1. Walk the house and point out problem areas or damage
  2. Cover outlets, lights and fixtures, and pre-wet landscaping
  3. Apply a soft wash solution from the bottom up
  4. Rinse from the top down at low pressure, including eaves and soffits
  5. Rinse plants, check windows and walk the house with you

How much does house washing for log homes cost?

$300-$700Typical range for a typical 1,500-2,500 sq ft home
2-4 hoursTypical time on site
Every 1-2 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Local house washing for log homes for Connecticut

Humid summers in Connecticut grow green algae and black mildew on the shaded sides of homes, especially on vinyl and painted wood. A soft wash kills the growth rather than just knocking it off, so the siding stays clean longer.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

We cover 155 cities and towns across Connecticut. Find house washing for log homes in your city:

House Washing for Log Homes: frequently asked questions

How much does house washing for log homes cost in Connecticut?

House Washing for Log Homes typically costs $300-$700 for a typical 1,500-2,500 sq ft home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for house washing for log homes?

For log homes: low pressure with a wide tip; higher pressure only as part of stripping old finish before refinishing. What we avoid: high pressure that furs the wood and forces water deep into checks in the logs. The cleaning solution does most of the work, followed by a gentle rinse.

Is house washing for log homes safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule house washing for log homes?

Every 1-2 years, and before each refinish. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Connecticut

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Driveway Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$400

Rust Stain Removal for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $150-$500

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

HOA & Apartment Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $800-$5,000

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Graffiti Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $200-$800

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Graffiti Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$800

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Connecticut. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote